2002 THE HERITAGE – PROSPECT GUITAR IN BLUEBURST.

£1,250.00

Quite a striking looking guitar. The Heritage Prospect is a variation on the ES335 style of guitars.

1 in stock

Description

The Bluebook Says:

Instruments currently built in Kalamazoo, MI since 1984. The company was incorporated on April 1, 1985. The Lasar Music Corporation, located in Brentwood, TN is the exclusive sales and marketing company for Heritage Guitars, Inc.
The Gibson guitar company was founded in Kalamazoo in 1902. The young company continued to expand, and built production facilities at 225 Parsons Street (the first of a total of five buildings at that location) in 1917. In 1974, Gibson was acquired by the Norlin corporation, which also opened facilities the same year in Nashville, TN. However, financial troubles led Norlin to consider shutting down either the Kalamazoo or Nashville facilities in the early 1980s. Even though the Kalamazoo plant was Gibson’s home since 1917, the decision was made in July of 1983 by Norlin to close the plant. The doors at 225 Parsons Street closed in the fall of 1984.
Heritage Guitar, Inc. opened in 1985 in the original Gibson building. Rather than uproot and move to Tennessee, Jim Deurloo, Marvin Lamb, and J.P. Moats elected to leave the Gibson company, and stay in Kalamazoo to start a new guitar company. Members of the original trio were later joined by Bill Paige and Mike Korpak (other long time Gibson workers). Korpack left the Heritage company in 1985.
Jim Deurloo began working at Gibson in 1958, and through his career was promoted from neck sander to pattern maker up to general foreman of the pattern shop, machine shop, and maintenance. Deurloo was the plant manager at Guild between 1969 to 1974, and had been involved with the opening and tooling up of the newer Nashville facility in 1974. During this time period, Deurloo was also the head of engineering, and was later promoted to assistant plant manager. In 1978 Deurloo was named plant manager at the Kalamazoo facility.
Marv Lamb was hired by Gibson in 1956 to do hand sanding and other jobs in the wood shop (Lamb was one of the workers on the ’58 Korina Flying V and Explorer guitars). He was promoted through a series of positions to general foreman of finishing and final assembly, and finally to plant superintendent in 1974 (a position he held until Gibson closed the plant in 1984).
J.P. Moats was hired by Gibson in 1957 for sanding and final cleaning. Through promotions, Moats became head of quality control as well as the supervisor of inspectors, and later the wood inspector. While inspecting wood for Gibson, Moats was also in charge of repairs and custom orders.
Bill Paige, a graduate of the business school at Western Michigan University joined Gibson in 1975 as a cost accountant and other capacities in the accounting department.
Heritage operated under the ownership of Deurloo, Lamb, Moats, and Page until mid-2007. During the summer of 2007, Heritage halted all guitar production while the owners looked for a new owner of Heritage. Local attorney Vince Margol bought out Bill Paige’s share of Heritage and became an equal partner with Deurloo, Lamb, and Moats. Margol also became the president and managing partner of Heritage while Paige accepted a position within the organization.
For more information, visit Heritage’s website or contact them directly. Additional source: Kalamazoo Gazette.

PROSPECT STANDARD
– dual cutaway smaller 335-style, cream-bound curly maple laminate top/back f-holes, solid curly maple sides, mahogany neck, 20-fret bound rosewood fingerboard with pearl dot inlay, rollermatic bridge/stop tailpiece, three-per-side tuners, white pickguard, two humbucker pickups, four knobs (two v, two tone), three-position switch, chrome hardware, available in Almond Sunburst or Antique Sunburst finish, 15 in. body width, 1.5 in. body thickness, 24.75 in. scale, mfg. 1991-present.

Heritage Says:

Prospect
Type: Semi-hollow body
Top Material:Laminated curly maple
Back Material:Laminated curly maple
Rim Material:Solid curly maple
Width:15″Length: 16-3/4″
Rim Thickness:1-5/8″
Bracing: Solid center block, floating back
F-Holes:Two
Cutaways:Venetian
NECKMaterial:One piece mahogany
Scale Length: 24-3/4”
Shape: Soft C
Tenon Type:Short
Headstock Size:Small
Headstock Pitch:17°
Headstock Accents: The Heritage decal
Fretboard Material:Rosewood
Number of Frets: 22
Fretboard Inlays:Mother of pearl dot
Fretboard Radius:12”
Nut Material:Bone
Nut Width: 1-11/16”
Fret Size:.108 x .051
Truss Rod:Single action
ELECTRONICS
Controls:Two volume, Two tone – Amber bell knobs
Switching:One Switchcraft toggle switch for pickup selection
Pots:CTS – 500K
Capacitors:Vishay / Roederstein – 0.022uF 250V 10%
HARDWARE
Finish:Nickel
Bridge:TonePros
Tailpiece:Stop Bar
Tuning Machines:Grover Standard
Pickguard:None
ACCENTS
Lacquer:High gloss nitrocellulose
Binding:Single cream binding around body top, back, and neck
MISC
Case:Hardshell TKL

I say:

A gorgeous looking guitar.  Some damage to the lacquer on the rear and lower edges due to it being placed on a cheap stand that has reacted to the lacquer.  

Pickups are great  – and the variphase controls give a little extra breadth to the range of sounds available.  Neck pickup is warm and Jazzy, Bridge pickup is bright and Sassy.  The two micro switches give the option of coil taps, hum buckers and variphase control.

I like the “slightly smaller than a 335” body shape and the neck is really nice to play.

Case is pretty much undamaged.

Reviews

There are no reviews yet.

Be the first to review “2002 THE HERITAGE – PROSPECT GUITAR IN BLUEBURST.”

Your email address will not be published. Required fields are marked *